Latest News
30 Jan, 2023
25 ° C



It’s fantastic that you’re interested in your GPU health. However, you might be astonished to learn that certain graphics cards are built to go beyond and above those temperatures! Yes, some GPUs can safely exceed 90 degrees Celsius without causing damage.

Many graphics cards are available today, all of which are engineered to operate safely at varying temperatures. A GTX 1050, for example, has a safe gaming temperature of 60°C-70°C, while a GTX 750 Ti has a safe gaming temperature of 55°C-65°C. Whatever the case may be, anything above 80°C indicates something must do to reduce the temperature to roughly 70°C or lower.

What is the best accurate method to measure GPU temperature?

The temperature of the GPU can be checked using a variety of applications and hardware techniques. Some of the applications are available for free download and use, and it allows you to monitor the GPU temperature. Some good GPU temperature measurement software is listed below:

GPU Temperature



If you’re running Windows 10, you can now monitor the GPU temp in the task manager with the latest iteration. You may check the GPU utilization rate, GPU memory, specialized GPU memory, and shared GPU memory using the GPU inspector.

If you want to purchase the best GPU for your system, you can check the Beem build site.

How to Lower GPU Temperature in a Few Simple Steps methods

When gaming or other intensive graphics processing jobs, graphics cards become extremely hot and must be cooled down to avoid damage. Aside from the visible image, heating can shorten the graphics card’s lifespan. We’ve compiled a list of some of the most efficient ways to lower the GPU temperatures of your graphics card.

Clean the Fan and Heatsink of Debris

As a result, we recommend the following method:

First, remove the PCI-E slot from your GPU.

Then, take apart the fan and heatsink.

Take the radiator and soak it in a mixture of water, a pinch of vinegar, and a squeeze of lemon.

Let place it for an hour or two hours.

Remove the heatsink from the liquid and dry it with a dry cloth to remove any remaining moisture.

Allow it to dry naturally. If you’re not sure, let it sit for at least 24 hours.

Replace the radiator and fan on the GPU, and reconnect the heatsink to the motherboard.

Boost the circulation of air in the case

Getting the proper airflow may seem insignificant, but it may make a huge difference when done correctly. Unfortunately, we can’t provide you solid solutions because the solution is case-by-case (no pun intended), but we can give you some pointers:

Plan the airflow – your fans should be positioned such that cool air enters and hot air exits. Air should flow along the front and back and from the base to the tip for the most excellent airflow.

Cable management – if your cords aren’t in order, you’ll end up with a lot more heat than you bargained it. As a result, it’s ideal for making sure the connections are tucked safely away and don’t get in the way of the airflow inside the case.

Concentrate on hot places – if you want to lower GPU temperatures, you should strive to have excess heat from which your card is positioned blow elsewhere where. It should, ideally, have a clear passage out.

Thermal paste should replace.

The GPU card’s thermal mass may dry out in some circumstances. The thermal paste loses its efficiency when it dries out, contributing to the rise in temperature. In this instance, replenishing the warm compress helps to lower the temperature. In addition, the thermal paste between the GPU and the heat sink becomes fried due to the heat and must be replaced.

Remove the fan and heat sink to change the thermal paste, and then put a good grade warm compress on it. Arctic Silver 5 is a high-quality thermal paste that can last a long time when applied to the graphics card. In addition, the application of a high-grade thermal paste will aid in decreasing the GPU’s temperature.

Fan frequencies can adjust.

It’s also conceivable that the fans aren’t spinning at the proper pace, causing the GPU to overheat. Some boosting software, such as MSI Afterburner, allows you to customize the fan speed to meet your specific needs. You must keep an eye on the GPU temperature and adjust the fan speed when it reaches a particular level. If you do so, you’ll ensure that the fan is running at full speed, even if the graphics card is severely overheated. This action will significantly lower the total temperature.

Provide a cooler.

Although most graphics cards come with a cooling solution, they only use the heat sink fan, which is insufficient to keep the temperature down. If your graphics card becomes heated during gaming, you can use a cooling solution to lower the temperature. Water or liquid cooler is highly effective in reducing the temperature. Unlocked multiplier GPUs benefit from water or liquid cooling solutions. If you have an overclocked GPU, there is a reasonable risk that it may overheat, and liquid cooling is the best solution for this. However, before purchasing, ensure that it will fit appropriately in your graphics card; otherwise, it will be useless.

Minimize GPU Heat using Software

Given that tampering with Software is the most prevalent reason for GPU temperature rise, we should list other common concerns readily resolved.

Revert the GPU Driver

Even though this problem should not exist, it does, and we will have to address it.

As you would expect, it happens when the GPU maker upgrades its drivers, causing the card to work even more complex or more effectively, but the fans don’t appear to get the memo. In any case, a simple rollback should suffice. Of course, this isn’t to imply you shouldn’t update your driver. You should, but it’s occasionally better to wait a little longer.

Reduce the GPU’s clock speed

You may have to do it if you unintentionally overclock the GPU and are now paying a high budget. However, this isn’t the only reason you’ll need to lower the GPU’s clock speed. It’s conceivable that, despite its best efforts, the card won’t be able to manage all of the console games that are being thrown at it. In this instance, you may have no choice except to accept defeat and free your graphics card from pain.

The procedure for underclocking the GPU is nearly identical to that for overclocking but in reverse. You’d cut the core and memory clocks in regions where they’d be increased.


In addition to improving performance in video games or with whichever professional tool you’re using, lowering GPU temperature can help you avoid other, sometimes deadly, problems.

Fortunately, most GPUs these days have good security features and will shut down if they become overheated. But, unfortunately, it doesn’t always happen, and electrostatic discharge to the PCB can occur, leaving it useless as a result.

Although we are committed to keeping the GPU temperature under control here, it’s important to remember that heat can affect any aspect of your PC, and most of the information we offered you today applies to them as well.

Inline Feedbacks
View all comments
Would love your thoughts, please comment.x